How to Temporarily Cover a Cleaved Car Window

Protect your auto with a temporary window embrace made with tape and a high-density garbage bag that will stand up to the elements.

Every editorial product is independently selected, though nosotros may be compensated or receive an affiliate commission if yous buy something through our links. Ratings and prices are accurate and items are in stock equally of fourth dimension of publication.

Introduction

Protect your car with a temporary window cover fabricated with tape and a loftier-density garbage bag that will stand up to the elements.

Tools Required

Materials Required

  • Duct tape (equally needed)
  • High-density garbage bag
  • Masking tape
  • Paper purse

A cleaved car window should be repaired every bit soon as possible, considering a temporary window cover volition hamper your visibility and leave your car an easy target for thieves.

To protect your auto from the elements in the meantime, a high-density garbage handbag is ideal. These bags are made of resin, which doesn't easily tear, and they're clear, and so y'all can withal run into through them (somewhat) if you demand to drive. A low-density garbage bag, like those in your kitchen, tin also work, merely you shouldn't plan on driving far or fast until the window is repaired.

ⓘ

Project stride-by-step (five)

Step ane

Remove the Drinking glass

  • Remove all the glass from the broken auto window while wearing thick piece of work gloves.
    • Utilise a hammer to remove stubborn shards of glass, tapping firmly but non excessively difficult so you lot don't shatter the glass into additional pieces.
  • Dispose of the glass in a newspaper purse. Seal the bag with tape and toss it into the trash.
  • Vacuum the inside of the car thoroughly to catch the finer shards of glass.

Broken glass

Step 2

Clean the Window Frame

  • Wipe the window frame and seal with a clammy microfiber cloth to clean off clay and grit.
  • Permit the window frame and seal dry out completely.

Cleaning the window frame

Footstep 3

Prepare the Plastic and Record

  • Measure the length and width of your car window with a measuring tape.
  • Unfold the plastic garbage bag and cut a rectangle to fit your automobile window, plus almost 1/2-in. all around. You should be able to pull the plastic taut and tape it to the car without having an excessive corporeality of extra plastic effectually the edges, which can be catchy to trim after the plastic is taped.
    • Pro tip: Cutting the plastic purse is easier indoors. If you have to do it outside and it's informal, assemble rocks or other weights ready to keep the bag from blowing away.
  • Cut up eight to x pieces of masking tape, each about one to ii inches long.
    • Pro tip: Identify tape on the automobile door then it's fix when you need information technology.

Trash bags

Step four

Tape the Plastic Garbage Pocketbook

  • Open the car door to adhere the plastic garbage bag from the inside of the machine.
  • Align the plastic to the top inner corner of the window frame.
  • Apply a piece of masking tape to the plastic pocketbook and the automobile window frame, placing the tape underneath the safety window seal.
  • Pull the plastic taut and adhere it to the superlative outer corner with a piece of masking record, placing the tape underneath the condom window seal.
  • Adhere i to ii more pieces of masking record along the height of the window to secure the plastic.
  • Pull the plastic taut and adhere it to the bottom inner corner of the window frame with a slice of masking tape.
  • Pull the plastic taut and adhere it to the bottom outer corner of the window frame with a piece of masking tape.
  • Attach one to two more pieces of masking tape along the sides of the window to secure the plastic.
  • Adhere i to two more pieces of masking tape along the bottom of the window to secure the plastic.
    • Pro tip: Duct tape may be necessary to secure the plastic along the bottom if the masking tape doesn't adhere as well to the soft rubber of the door. Don't apply duct tape exclusively because information technology volition damage the car paint when you lot peel it off the frame.

Tape the Plastic Garbage Bag

Stride five

Create the Seal

  • Cut six to eight long pieces of masking tape, enough to go around the entire window perimeter.
  • Adhere the tape around the plastic to secure the first layer of tape and create a seal to keep out air and water.
    • Pro tip: Again, duct record may be necessary for the bottom seal if the masking record doesn't adhere as well to the soft prophylactic of the door.

Create the Seal

Originally Published: Baronial 17, 2020